12V-1100GPH Boat / RV Bilge Sump Water Pump with Grey Drain Pipe

12V-1100GPH Boat / RV Bilge Sump Water Pump with Grey Drain Pipe

1. The casing of the pump is made of durable and waterproof ABS. And all the ends and terminals of the wires are equipped with heavy-duty marine sealant, which is very safe to use.
2. Fully capable of diving and burning protection.
3. The easy to install and remove filter device ensures that the pump runs freely without vibration.
4. The suction lift does not need to be completely submerged.
5. Function: pump out the accumulated water at the bottom of the cabin
6. Scope of application: main purpose:
It can be widely used in sewage sampling, large-flow liquid transfer, low-noise continuous working occasions; large and super large aquariums, small swimming pools, reservoirs, fountains and other purposes. Fresh water and sea water quality analysis, sewage treatment, sewage sampling, water purification, ship bilge sewage discharge, breeding and viewing, water circulation transfer, agricultural spraying, irrigation, ground, carpet cleaning, etc.; applicable industries: environmental protection, medicine, ships, fisheries and breeding, Industry, agriculture, housekeeping and other industries
7. Installation position: bottom of the cabin
8. Parameters:
Material: ABS+stainless steel
Traffic: 1100GPH
Working voltage: 12V
Inlet outer diameter: 29mm
Maximum operating temperature: 43 degrees Celsius
Wiring method: red positive pole, blue (or black) negative pole
Bellows: 6 feet
Matching drain outlet: 1-1/8 inches (29mm)